Commander 4WD V8-4.7L Flex Fuel (2009)
Windshield: Service and Repair
Windshield - Removal
REMOVAL
1. Before proceeding with the following repair procedure, review all warnings and cautions See: Service Precautions.
2. Remove the rear view mirror See: Body and Frame/Mirrors/Service and Repair/Interior Rearview Mirror - Removal.
3. Remove the rain sensor module from the windshield See: Lighting and Horns/Ambient Light Sensor/Service and Repair/Light Rain Sensor Module
(LRSM) - Removal.
4. Remove the cowl grille See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair/Cowl Panel Cover - Removal
CAUTION: Be careful not to damage painted surfaces when removing moldings or cutting urethane around the windshield.
5. Remove molding from the top of the windshield.
6. Using an assistant and a wire-type windshield cut-out tool (1, 3 and 4), cut and separate the urethane adhesive (2) securing the windshield to the
windshield fence.
7. Carefully remove the windshield from the vehicle.
