Commander 4WD V8-4.7L VIN N (2006)
Camshaft: Service and Repair
Right Camshaft
CAMSHAFT - RIGHT
REMOVAL
1. Remove the cylinder head covers (1).
CAUTION: When the timing chain is removed and the cylinder heads are still installed, DO NOT forcefully rotate the camshafts or crankshaft
independently of each other. Severe valve and/or piston damage can occur.
CAUTION: When removing the cam sprocket, timing chains or camshaft, Failure to use special tool 8350 will result in hydraulic tensioner ratchet
over extension, Requiring timing chain cover removal to re-set the tensioner ratchet.
2. Set engine to TDC cylinder #1, camshaft sprocket V8 marks at the 12 o'clock position.
3. Mark one link on the secondary timing chain on both sides of the V8 mark on the camshaft sprocket to aid in installation.
