Commander 4WD V8-4.7L VIN N (2006)
CAUTION: Do not hold or pry on the camshaft target wheel for any reason, Severe damage will occur to the target wheel. A damaged target wheel
could cause a vehicle no start condition.
4. Loosen but DO NOT remove the camshaft sprocket retaining bolt (2). Leave bolt snug against sprocket (3).
NOTE: The timing chain tensioners must be secured prior to removing the camshaft sprockets. Failure to secure tensioners will allow the tensioners
to extend, requiring timing chain cover removal in order to reset tensioners.
CAUTION: Do not force wedge (3) past the narrowest point between the chain strands. Damage to the tensioners may occur.
5. Position Special Tool 8350 timing chain wedge (3) between the timing chain strands. Tap the tool to securely wedge the timing chain against the
tensioner arm and guide.