Commander 4WD V8-4.7L VIN N (2006)
Engine Mount: Service and Repair
Rear Mount
MOUNT-ENGINE REAR
REMOVAL
4X4
1. Raise the vehicle on a hoist.
2. Using a suitable jack, support transmission.
3. Remove the crossmember.
4. Remove the fasteners (2) from the transmission mount (1) to transmission.
5. Remove the mount.
INSTALLATION
1. Position the transmission mount (1) on the transmission. Install the bolts (2) that attach the transmission mount to the transmission.
2. Torque the bolts to 30 Nm (22 ft. lbs.) torque.
3. Install the crossmember.