Commander 4WD V8-4.7L VIN N (2006)
Power Steering Line/Hose: Service and Repair
Return Hose - Gear to Cooler
RETURN HOSE - GEAR TO COOLER
REMOVAL
1. Siphon the power steering fluid from the reservoir.
2. Disconnect the return hose (3) at the fluid cooler (4).
3. Disconnect the return hose (3) at the gear (7).
4. Remove the return hose (3) from the vehicle.
INSTALLATION
1. Install the line (3) to the vehicle.
2. Reconnect the power steering return hose (3) to the power steering gear (7) Tighten to 28 Nm (21 ft. lbs.).
3. Reconnect the power steering return hose (3) to the fluid cooler (4).
4. Refill the power steering fluid and bleed the system.
