Commander 4WD V8-4.7L VIN N (2006)
6. Perform fuel pressure release procedure. See: Fuel Filter/Fuel Pressure Release/Service and Repair
7. Disconnect negative battery cable from battery.
8. Clean fitting of any foreign material before disassembly.
9. 2-Button Type Fitting: This type of fitting (1) is equipped with a push-button located on each side of quick-connect fitting (2). Press on both
buttons simultaneously for removal. Tools are not required for disconnection.
10. Pinch-Type Fitting: This fitting (1) is equipped with two finger tabs (2). Pinch both tabs together while removing fitting. Tools are not required
for disconnection.
