Commander 4WD V8-4.7L VIN N (2006)
12. Remove 4 fuel rail mounting bolts (1).
13. Gently rock and pull left side of fuel rail until fuel injectors just start to clear machined holes in cylinder head. Gently rock and pull right side of
rail until injectors just start to clear cylinder head holes. Repeat this procedure (left/right) until all injectors have cleared cylinder head holes.
14. Remove fuel rail (with injectors attached) from engine.
15. Fuel injectors are to be removed.
INSTALLATION
1. Fuel injectors are to be installed.
2. Clean out fuel injector machined bores in intake manifold.
3. Apply a small amount of engine oil to each fuel injector O-ring. This will help in fuel rail installation.