Commander 4WD V8-4.7L VIN N (2006)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
REMOVAL
The Idle Air Control (IAC) motor (3) is located on the side of the throttle body.
1. Remove air resonator box at throttle body.
2. Disconnect electrical connector from IAC motor.
3. Remove two mounting bolts (screws).
4. Remove IAC motor from throttle body.
INSTALLATION
1. Install IAC motor (2) to throttle body.
2. Install and tighten two mounting bolts (screws) to 7 N.m (60 in. lbs.) torque (4).
3. Install electrical connector.
4. Install air resonator to throttle body.
