jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

All Technical Service Bulletins for Control Module HVAC: > < A/C - Temperature Control Settings Improvement|Page 224
Page 6
background image

c.

The new HVAC ATC module software version level will be in the upper right corner in the white screen.

d.

Verify that the new HVAC ATC module software version level is "05.00.23.".

NOTE:

Due to the HVAC ATC programming procedure, a DTC may be set in other modules (PCM, TCM, FCM, BCM, MIC, SKREEM, etc.) within the
vehicle, if so equipped. Some DTC's may cause the MIL to illuminate. From the "Home" screen select "System View". Then select "All DTC's".
Press "Clear All Stored DTC's" if there are any DTC's shown on the list.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

FAILURE CODE:

Disclaimer:

This bulletin is supplied as technical information only and is not an authorization for repair.

All Technical Service Bulletins for Control Module HVAC: > < A/C - Temperature Control Settings Improvement|Page 224