Commander 4WD V8-4.7L VIN N (2006)
The turbine is the output, or driven, member of the converter. The turbine is mounted within the housing opposite the impeller, but is not attached to
the housing. The input shaft is inserted through the center of the impeller and splined into the turbine. The design of the turbine is similar to the
impeller, except the blades of the turbine are curved in the opposite direction.
STATOR
The stator assembly is mounted on a stationary shaft which is an integral part of the oil pump. The stator (1) is located between the impeller (2) and
the turbine (4) within the torque converter case.
