Commander 4WD V8-4.7L VIN P Flex Fuel (2007)
Power Steering Line/Hose: Service and Repair
Installation
Pressure Hose - Gear To Pump
PRESSURE HOSE - GEAR TO PUMP
1. Install the line (2) to the vehicle.
2. Install the three mounting brackets (6) for the pressure line (2) to the engine cradle.
3. Reconnect the power steering pressure line (2) to the power steering gear (7) Tighten to 28 Nm (21 ft.lbs.).
4. Reconnect the power steering pressure line (2) to the power steering pump (1) Tighten to 28 Nm (21 ft.lbs.).
5. Refill the power steering fluid and bleed the system.
Return Hose - Pump To Cooler
RETURN HOSE - PUMP TO COOLER
1. Install the line (5) to the vehicle.
2. Reconnect the power steering return hose (53) to the power steering cooler (4).
3. Reconnect the power steering return hose (5) to the power steering pump (1) Tighten to 28 Nm (21 ft.lbs.).
4. Refill the power steering fluid and bleed the system.
Return Hose - Gear To Cooler
RETURN HOSE - GEAR TO COOLER
