jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Oil Cooler, Engine > < Engine Oil Level Check|Page 1762
Page 2
background image

8. Install oil pan drain plug (2) and tighten drain plug to 40 Nm (30 ft. lbs.).

9. Install new oil filter (1)See: Oil Filter/Service and Repair/Removal and Replacement/Engine Oil Filter - Installation.

10. Lower vehicle and fill crankcase with specified type and amount of engine oil   and   .
11. Install oil fill cap.
12. Start engine and inspect for leaks.
13. Stop engine and inspect oil level.

OIL FILTER SPECIFICATION

All engines are equipped with a high quality full-flow, disposable type oil filter. Replace oil filter with a Mopar(R) or the equivalent.

USED ENGINE OIL DISPOSAL

Care should be exercised when disposing used engine oil after it has been drained from a vehicle engine. Refer to the WARNING listed above.

Oil Cooler, Engine > < Engine Oil Level Check|Page 1762