Compass 2WD L4-2.0L (2009)
Power Steering Line/Hose: Service and Repair
Power Steering Hose - Removal
Pressure Hose
GAS ENGINE
NOTE: Before proceeding, See: Steering and Suspension/Steering/Service Precautions .
1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Remove the engine appearance cover.
3. Remove the pressure Hose (3) at the pump pressure port (5).
4. Remove the pressure hose routing bracket bolt (2) at the upper mount (8).
5. All except 2.4L Engine with All-Wheel-Drive - Remove the pressure hose routing clamp bolt (1) at the exhaust manifold.
