Compass 2WD L4-2.0L (2009)
Front Steering Knuckle: Service and Repair
Front Steering Knuckle - Removal
REMOVAL
NOTE: Before proceeding, review all Warnings and Cautions. See: Suspension/Service Precautions/Technician Safety Information
1. Raise and support the vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
3. Remove cotter pin (1), lock (7) and spring washer (2) from halfshaft stub shaft (5).
4. While a helper applies the brakes to keep the hub (1) from rotating, remove the hub nut (3) and washer (6).
5. Access and remove the front brake rotor. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Removal
