Compass 2WD L4-2.0L VIN 0 (2007)
Trailer Lamps: Description and Operation
Operation
OPERATION
The trailer tow wiring jumper harness is connected to the unibody wire harness at the right rear lamp unit connections. The fused B(+) circuit take out is
located near the rubber grommet for the right rear lamp wiring take outs of the unibody wire harness behind the right rear D-pillar trim. The jumper
harness can be connected by removing the right rear lamp unit and unseating the rubber grommet from the D-pillar to access the fused B(+) circuit take
out. Refer to the Instruction Card packaged with the jumper harness for additional details.
