jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Body - Noise When Operating Front/Rear Door Windows|Page 7910 > < Body - Noise When Operating Front/Rear Door Windows|Page 7908
Page 3
background image

1.

Remove door trim panel and watershield to access regulator rails and sliders. Refer to the detailed removal procedures available in
DealerCONNECT > TechCONNECT under: Service Info > 23 - Body > Doors - Front/Rear > Panel, Door Trim > Removal > Removal.

2.

Lower regulator to a position where forward (white) slider is visible through opening.

3.

Apply 0.5 oz. of white lithium grease pn 68003883AA to metal rail between slider fingers.

4.

Move regulator to position where rear (white) slider is visible through opening.

5.

Apply 0.5 oz. of white lithium grease pn 68003883AA to metal rail between slider fingers.

6.

Raise and lower the window 3 or 4 times to distribute the grease and verify issue is resolved.

7.

Install watershield and door trim panel. Refer to the detailed installation procedures available in DealerCONNECT > TechCONNECT under:
Service Info > 23 - Body > Doors - Front/Rear > Panel, Door Trim > Installation > Installation.

8.

Repeat the lubrication process only on doors that have a regulator squeak or groan issue.

REPAIR PROCEDURE - LX:

1.

Remove door trim panel and watershield to access regulator rails and sliders. Refer to the detailed removal procedures available in
DealerCONNECT > TechCONNECT under: Service Info > 23 - Body > Doors - Front/Rear > Panel, Door Trim > Removal > Removal.

2.

Lower regulator to a position where forward (white) slider is visible through opening.

3.

Apply 0.5 oz. of white lithium grease pn 68003883AA to metal rail between slider fingers.

4.

Move regulator to position where rear (white) slider is visible through opening.

5.

Apply 0.5 oz. of white lithium grease pn 68003883AA to metal rail between slider fingers.

6.

Raise and lower the window 3 or 4 times to distribute the grease and verify issue is resolved.

7.

Install watershield and door trim panel. Refer to the detailed installation procedures available in DealerCONNECT > TechCONNECT under:
Service Info > 23 - Body > Doors - Front/Rear > Panel, Door Trim > Installation > Installation.

8.

Repeat the lubrication process only on doors that have a regulator squeak or groan issue.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Body - Noise When Operating Front/Rear Door Windows|Page 7910 > < Body - Noise When Operating Front/Rear Door Windows|Page 7908