Compass 2WD L4-2.0L VIN 0 (2007)
Console: Service and Repair
Bezel - Console Shifter
Removal
REMOVAL
Automatic
1. Pull up on shifter knob (3) and remove.
2. Using trim stick C-4755 or equivalent, separate the bezel (4) from the trim ring (5), if equipped.
3. Remove the screws (2) and using trim stick C-4755 or equivalent, separate the trim ring (5) from the shifter console (6).
Manual
1. Pull up on shifter knob (4) and remove.
2. Using trim stick C-4755 or equivalent, pry up on the shifter boot (5) and separate from the trim ring (3).
3. Remove the screws (3) and using trim stick C-4755 or equivalent, separate the trim ring (2) from the shifter console (6).
Installation
INSTALLATION
Automatic
