Compass 2WD L4-2.0L VIN 0 (2007)
1. Adjust the front seat to its most forward position for easiest access to the front seat belt lower anchor cover (1) and the B-pillar trim.
2. Grasp the upper edge of the lower anchor cover and pull upward to unsnap it from the front seat cushion outboard side shield (4).
3. Remove the screw (2) that secures the seat belt (3) lower anchor to the outboard side of the front seat cushion frame.
4. Remove the screw (3) that secures the seat belt turning loop to the height adjuster on the upper B-pillar.
5. Remove the seat belt turning loop from the height adjuster.
6. Release the upper retaining clips and separate the lower B-pillar trim (2) from the pillar, pull seat belt (4) through the hole and remove.
Installation
INSTALLATION
