Compass 2WD L4-2.0L VIN 0 (2007)
4. Position the seat belt (3) lower anchor to the mounting hole on the outboard side of the front seat cushion frame. Be certain that the seat belt
webbing between the turning loop and the lower anchor is not twisted.
5. Install and tighten the screw (2) that secures the lower anchor to the seat. Tighten the screw to 51 Nm (37.5 ft. lbs.).
6. Install the lower anchor cover (1) onto the front seat cushion outboard side shield (4).
Removal
REMOVAL
1. Remove the screw (3) that secures the seat belt turning loop to the height adjuster on the upper B-pillar.
2. Remove the seat belt turning loop from the height adjuster.
3. Separate the lower B-pillar trim (2) from the pillar and position aside.
4. Remove the upper B-pillar trim (1).
