Compass 2WD L4-2.0L VIN 0 (2007)
1. Remove the seat belt anchor bolt (5).
2. Using a trim stick C-4755 or equivalent, separate the retaining clips (3) and remove the C-pillar trim (2).
3. Pull the seat belt (4) through the hole in the trim.
C-Pillar Trim Panel-Installation
INSTALLATION
Compass
1. Pull the seat belt through the hole in the trim.
2. Position the trim tabs (2) into the body and seat the trim retaining clips (3) fully.
3. Install and tighten the screw (4) that secures the lower anchor to the rear floor panel. Tighten the screw to 40 Nm (30 ft. lbs.).
Patriot