Compass 2WD L4-2.0L VIN 0 (2007)
NOTE: The camshaft sprockets and the camshaft phasers are an assembly and cannot be serviced separately.
CAUTION: Do not use an impact wrench to tighten camshaft sprocket bolts. Damage to the camshaft-to-sprocket locating dowel pin and
camshaft phaser may occur.
1. Refer to Camshaft phaser (2) installation Refer to CYLINDER HEAD/CAMSHAFT(S) - INSTALLATION).
Installation - Timing Chain
TIMING CHAIN
1. Verify that the crankshaft sprocket keyway is at the 9 o'clock position.
2. Align camshaft timing marks (3) so they are parallel to the cylinder head and aligned each other as shown.