Compass 2WD L4-2.0L VIN 0 (2007)
8. Install timing chain tensioner (1) and tighten bolts to 12 Nm (105 in. lbs.).
9. Remove timing Tensioner Pin 8514 (2).
10. Rotate the crankshaft CLOCKWISE two complete revolutions until the crankshaft is repositioned at the TDC position with the key way at the 9
o'clock position.
11. Verify that the camshafts timing marks (3) are in the proper position.
12. Install front timing chain cover.
13. Install the balancer and verify that balancer mark (2) and cover mark (1) are aligned.
14. Connect negative battery cable.
15. Fill with oil, start engine and check for leaks.
Removal - Crankshaft Sprocket
