Compass 2WD L4-2.0L VIN 0 (2007)
1. Install a new exhaust manifold gasket DO NOT APPLY SEALER.
2. Tighten the exhaust manifold bolts to 34 Nm (25 ft. lbs.).
3. Install exhaust manifold heat shields. Tighten bolts to 12 Nm (105 in. lbs.).
4. Install exhaust manifold support bracket (2).
5. Install new catalytic converter gasket.
6. Install exhaust pipe to manifold (1). Tighten fasteners to 28 Nm (250 in. lbs.).
7. Connect oxygen sensor electrical connector (3).
