jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Outlets-Air|Page 6357 > < Outlets-Air
Page 1
background image

Air Duct: Service and Repair
Defroster Duct

Removal

REMOVAL

WARNING:  Disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or
service. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to discharge before
performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the proper precautions could
result in accidental airbag deployment and possible personal injury or death.

NOTE:  Illustration shown with instrument panel removed from vehicle for clarity.

NOTE:  LHD model shown. RHD model similar.

1. Remove the instrument panel top cover(.

2. Disconnect the right demister hose (6) and the left demister hose (7) from the defroster duct (3).

3. Remove the two screws (2) that secure the defroster duct to the defroster duct support (4).

4. Remove the two screws (1) that secure the defroster duct support to the instrument panel support (5) and position the defroster duct support out of

the way.

5. Remove the defroster duct from the top of the instrument panel.

Installation

INSTALLATION

NOTE:  Illustration shown with instrument panel removed from vehicle for clarity.

NOTE:  LHD model shown. RHD model similar.

Outlets-Air|Page 6357 > < Outlets-Air