Compass 2WD L4-2.0L VIN 0 (2007)
4. Install the air inlet housing (3) onto the HVAC housing (1).
5. Install the HVAC housing assembly.
HVAC Housing
HOUSING-HVAC
NOTE: LHD model with A/C shown in illustrations. RHD and heater-only models similar.
1. If removed, install the seal (4) onto the evaporator tube tapping block (5).
NOTE: Make sure that the foam insulator is properly positioned in the HVAC housing.
2. Carefully install the A/C evaporator (1) and foam insulator (2) into the lower half of the HVAC housing (3).
