Compass 2WD L4-2.0L VIN 0 (2007)
5. Firmly grasp the lower end of the turning loop trim cover (2) on the upper B-pillar and pull it straight out to unsnap it from over the height adjuster
knob (1), then roll the bottom of the cover upward and pull outward to disengage the upper tab from the slot in the adjuster cover above the knob.
6. Remove the screw (4) that secures the seat belt turning loop to the height adjuster (2) on the upper B-pillar (1).
7. Remove the seat belt turning loop from the height adjuster.
8. Remove the trim (3) from the lower B-pillar.
9. Pull the front seat belt turning loop and lower anchor through the seat belt opening in the lower B-pillar trim.
10. Disengage the two clips that secure the belt web guide (5) to the B-pillar.
11. Remove the screw (6) that secures the retractor lower bracket to the base of the inner B-pillar.
