Compass 2WD L4-2.0L VIN 0 (2007)
Power Mirror Switch: Service and Repair
Power Mirror Switch - Lhd
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the front door bolster.
3. Disconnect the electrical harness connectors.
4. With the bolster on the bench, gently pry in on the tabs of the mirror switch and push through the front of the cover and remove.
Installation
INSTALLATION
1. Place the mirror switch in bolster opening and firmly snap into place.
2. Connect the electrical harness connectors.
3. Install the front door bolster.
4. Connect the battery negative cable.
