Compass 2WD L4-2.0L VIN 0 (2007)
Power Steering Fluid Reservoir: Service and Repair
Installation
INSTALLATION
1. Install the plastic shield over the reservoir neck.
2. Attach the reservoir (5) to the strut tower bracket (2) using the mounting screw (1). Tighten mounting screw (1) to 12 Nm (106 in. lbs.).
3. Slide the pump supply hose (4) onto reservoir fitting. Expand hose clamp and slide it over hose on reservoir fitting. Secure clamp once it is past
bead formed into fluid reservoir fitting.
4. Slide cooler return hose (3) onto reservoir fitting. Expand hose clamp and slide it over hose on reservoir fitting. Secure clamp once it is past bead
formed into fluid reservoir fitting.
5. Install the coolant recovery bottle.
6. Fill and bleed the power steering system.
7. Check for leaks.
8. Install the engine appearance cover.
