Compass 2WD L4-2.0L VIN 0 (2007)
NOTE: Typical primer installation shown.
10. Clean and dry area of glass (2) to be re-glued with a suitable glass preparation solvent and rag.
11. Using a flash light, verify that glass primer is without damage.
12. Re-prime any damaged area. If old adhesive has been exposed for more than 12 hours, entire adhesive area needs to be re-primed.
13. Apply primer (1) around the perimeter of the glass to a width of 15 mm (0.5 in.) (2).
14. Allow primer to air dry for at least 10 minutes.
15. Using a flash light, verify that glass primer is without damage.
Windshield Preparation - Installing A New Windshield
1. Install the upper spacers (1) onto the upper edge of the glass (2).
