Compass 2WD L4-2.4L (2008)
NOTE: Windshield opening shown, liftgate opening similar.
3. Clean and dry area of liftgate opening to be re-glued with a suitable glass preparation solvent and rag.
4. Re-prime any damaged area. If old adhesive has been exposed for more than 12 hours, entire adhesive area needs to be re-primed.
5. Allow primer to air dry for at least 10 minutes.
liftgate glass Installation
1. Bead dimensions should be approximately 9.5 mm (0.375 in) wide (4) by 12.7 mm (0.50 in) in height (1).
