Compass 2WD L4-2.4L (2008)
Front Cross-Member: Service and Repair
Front Suspension Crossmember
Removal
REMOVAL
1. Raise and support the vehicle, See: Maintenance.
2. Remove the four wheel well screws.
3. If equipped, remove the three front screws (4), the three rear screws (2) and one push pin fastener from the center of the belly pan.
4. Remove the rear roll mount (4) through bolt (2).
5. Remove the three bolts (3) attaching the rear roll mount (5) to the crossmember and remove the mount.