Compass 2WD L4-2.4L (2008)
15. Install the fore/aft crossmember (4), See:
16. Install the front wheels (1), See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation
17. With the full weight of the vehicle on the suspension tighten the front control arm bushing bolts to 123 Nm (91 ft. lbs.)
18. Perform wheel alignment as necessary. See: Maintenance/Alignment/Service and Repair
19. Install the rear roll mount (4) and install the three bolts (3) attaching it to the crossmember.
20. Tighten the bolts (3) to 153 Nm (112 ft. lbs.).
21. Install the through bolt (2) and tighten to 65 Nm (48 ft. lbs.).