Compass 2WD L4-2.4L (2008)
12. Support the rear cradle assembly (1) with a suitable lifting device and position back into the vehicle.
13. Install the cradle bolts (2 and 3):
a. Tighten the front bolts (2) first to 110 Nm (81 ft. lbs.).
b. Tighten the rear bolts (3) next to 110 Nm (81 ft. lbs.).
14. Install the trailing link (1) bushing bolts (2 and 3):
a. Tighten the inboard bolts (3) first to 110 Nm (81 ft. lbs.).
b. Tighten the outboard bolts (2) next to 110 Nm (81 ft. lbs.).
15. Install the lower strut bolts (1).
16. Tighten the bolts to 99 Nm 73 ft. lbs.).
