Compass 2WD L4-2.4L (2008)
25. Position the brake lines (1) back into place, and install the bolts (2).
26. Tighten the bolts to 23 Nm (17 ft. lbs.).
27. Install the brake cable (2) onto the backing plate (3) and install the hair pin clip (1).
25. Position the brake lines (1) back into place, and install the bolts (2).
26. Tighten the bolts to 23 Nm (17 ft. lbs.).
27. Install the brake cable (2) onto the backing plate (3) and install the hair pin clip (1).