Compass 2WD L4-2.4L (2008)
1. Align the upper tab and position the upper B-pillar trim (1) into place and seat the trim fully.
2. Install and tighten the screw (3) that secures the turning loop to the height adjuster. Tighten the screw to 40 Nm (30 ft. lbs.).
3. Position the lower B-pillar trim (2) into place and seat fully.
C-Pillar Trim Panel-Removal
REMOVAL
Compass and Patriot
1. Remove the bolts (2) and remove the rear seat cushion (3), See: Seats/Seat Cushion/Service and Repair/Removal and Replacement/Seat Cushion -
Removal.
