Compass 2WD L4-2.4L (2008)
10. Install the tire and wheel assembly (1) See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels -
Installation. Install and tighten the wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
11. Slowly rotate the rear wheel and verify that the brake drum lightly drags on the shoes.
12. Lower the vehicle.
13. Remove the brake pedal holding tool.
14. Bleed the affected wheel cylinder as necessary. See: Brake Bleeding
15. Road test the vehicle to ensure proper brake operation.
