Compass 2WD L4-2.4L (2008)
Lifter / Lash Adjuster: Procedures
STANDARD PROCEDURE - MEASURING VALVE LASH
1. Remove engine cover.
2. Remove cylinder head coverSee: Cylinder Head Assembly/Valve Cover/Service and Repair/Cylinder Head Cover - Removal.
3. Rotate camshaft so lobes are vertical (1).
4. Check clearance using feeler gauges.
5. Repeat for all tappets and record readings.
6. If clearance was too small, go to the clearance to small procedure.
7. If clearance was too large, go to the clearance to large procedure.
Clearance to Small
