jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Control Assembly, HVAC > < A/C Condenser - Removal|Page 6941
Page 3
background image

15. If equipped with a gasoline engine, reposition and install the upper radiator support See: Body and Frame/Radiator Support/Service and

Repair/Upper Radiator Closure Panel/Installation.

16. If equipped with 2.4L turbo engine, install the charge air cooler to throttle body hose .
17. If equipped with the 2.0L diesel engine, install the front fascia See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service

and Repair/Front Fascia - Installation.

18. Reconnect the negative battery cable.

CAUTION: Do NOT run the engine with a vacuum pump in operation or with a vacuum present within the A/C system. Failure to follow
this caution will result in serious A/C compressor damage.

19. Evacuate the refrigerant system See: Service and Repair/Refrigerant System Evacuate
20. If the A/C condenser is being replaced, add 20 milliliters (0.7 fluid ounce) of refrigerant oil to the refrigerant system. When replacing multiple A/C

system components, refer to the Refrigerant Oil Capacities chart to determine how much oil should be added to the refrigerant system See: Service
and Repair/Refrigerant Oil Level. Use only refrigerant oil of the type recommended for the A/C compressor in the vehicle.

21. Charge the A/C system See: Service and Repair/Refrigerant System Charge.

Control Assembly, HVAC > < A/C Condenser - Removal|Page 6941