jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Housing Assembly HVAC > < A/C Line - Removal|Page 7029
Page 8
background image

30. Reposition the front of the right front wheel house splash shield (3) to the body (4) and install the three push-pin retainers (1) and the three screws

(2). Tighten the screws securely.

31. Install the right front wheel See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation.
32. Lower the vehicle.
33. Reconnect the negative battery cable.

CAUTION: Do NOT run the engine with a vacuum pump in operation or with a vacuum present within the A/C system. Failure to follow
this caution will result in serious A/C compressor damage.

34. Evacuate the refrigerant system See: Service and Repair/Refrigerant System Evacuate.
35. Adjust the refrigerant oil level See: Service and Repair/Refrigerant Oil Level.
36. Charge the A/C system See: Service and Repair/Refrigerant System Charge.

Housing Assembly HVAC > < A/C Line - Removal|Page 7029