jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Oil Pressure Sender > < Oil Change Reminder Lamp|Description|Page 9279
Page 1
background image

Oil Change Reminder Lamp: Service and Repair

Engine Oil Change Indicator System

Oil Change Required

Your vehicle is equipped with an engine oil change indicator system. The "Change Oil" message will flash in the instrument cluster odometer for
approximately 12 seconds after a single chime has sounded to indicate the next scheduled oil change interval. The engine oil change indicator system is
duty cycle based, which means the engine oil change interval may fluctuate dependent upon your personal driving style. Unless reset, this message will
continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, press and release the Trip
Odometer button on the instrument cluster. To reset the oil change indicator system (after performing the scheduled maintenance) refer to the following
procedure.

1.  Turn the ignition switch to the ON position (Do not start the engine).
2.  Fully depress the accelerator pedal slowly three times within 10 seconds.
3.  Turn the ignition switch to the OFF/LOCK position.

NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary repeat this
procedure.

Oil Pressure Sender > < Oil Change Reminder Lamp|Description|Page 9279