jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Tune-up and Engine Performance Checks > < Wheel Alignment|Page 1309
Page 2
background image

alignment rack/lift runway surface.

4. Compare the measurements to specifications listed in the following CURB HEIGHT SPECIFICATIONS chart. Maximum left-to-right

differential is not to exceed 12.5 mm (0.5 in.). 

5. If curb height is found to be out of specification and there is no sign of excessive body damage, curb height can be changed by replacing the

applicable spring with a spring offering a different check load. See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Front Strut / Shock/Removal

Tune-up and Engine Performance Checks > < Wheel Alignment|Page 1309