Compass 2WD L4-2.4L (2008)
11. Remove the fasteners (1) securing the power steering hose routing clamps (2) to the crossmember.
12. Remove the power steering pressure hose from the vehicle.
Pressure Hose - Gas Engine - Right-Hand-Drive
GAS ENGINE - RIGHT-HAND-DRIVE
NOTE: Before proceeding, See: Steering and Suspension/Steering/Service Precautions.
1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Remove the engine appearance cover.
3. Remove the pressure Hose (3) at the pump pressure port (5).
4. Remove the pressure hose routing bracket bolt (2) at the upper mount (8).
5. Raise and support the vehicle. See:
