Compass 2WD L4-2.4L (2008)
Seat Sensor/Switch: Description and Operation
Description
DESCRIPTION
The seat belt switch (4) is a small, normally open, single pole, single throw, plunger (3) actuated, momentary switch. One seat belt switch is installed on
the driver front seat belt retractor frame (2) over the retractor spool (1). The seat belt switch includes an integral connector that is connected to the
vehicle electrical system through a take out and connector of the body wire harness.
The seat belt switch cannot be adjusted or repaired and, if ineffective or damaged, the entire front seat belt and retractor unit must be replaced.
