Compass 2WD L4-2.4L (2008)
Hood Sensor/Switch (For Alarm): Service and Repair
Hood Ajar Switch Bracket
Removal
BRACKET
1. Remove the hood ajar switch (2) from the mounting bracket (3). See: Hood Ajar Switch - Removal.
2. Remove the two screws (4) that secure the hood ajar switch bracket to the left side of the cowl plenum panel (1).
3. Remove the hood ajar switch bracket from the cowl plenum panel.
Installation
BRACKET
1. Position the hood ajar switch bracket (3) onto the left side of the cowl plenum panel (1).
2. Install and tighten the two screws (4) that secure the hood ajar switch bracket to the cowl plenum panel. Tighten the screws to 4 Nm (35 in. lbs.).
3. Reinstall the hood ajar switch (2) into the mounting bracket. See: Hood Ajar Switch - Installation.