Compass 2WD L4-2.4L (2008)
4. While holding the cam bolt head (3) stationary, loosen and remove the toe link mounting cam bolt nut (1) and washer. Remove the cam bolt.
5. Remove the toe link (2).
Installation
INSTALLATION
CAUTION: When installing the cam bolt (3) and washer make sure the cams stay inside the abutments built into the crossmember. Failure to
do so can damage the abutments and make toe adjustment difficult.
1. Position the toe link (2) and install the cam bolt (3) from the front through the crossmember and link. Match the cam on the bolt to the marks made
during removal or position the top of the cam to the 12 O'clock position.
2. Install the cam washer and nut (1) securing the toe link (2) to the crossmember. Do not tighten at this time.
3. Install the bolt (2) securing the link to the trailing link. To install the bolt it may be necessary to flex the trailing link body mount bushing inward
