Compass 2WD L4-2.4L (2008)
3. Install the stay brace (3) on the crossmember (1). Install and tighten the mounting screws (2) to 25 Nm (18 ft. lbs.).
4. Install the mounting bolt (1) and nut (3) fastening the shock assembly (2) to the lower control arm (4). Do not tighten at this time.
NOTE: When attaching a stabilizer bar link to the lower control arm it is important that the lower mounting stud be positioned properly. The
lower mounting stud on the right side link needs to point toward the rear of the vehicle when inserted through the lower control arm mounting
flange. The left side link lower stud needs to point toward the front of the vehicle. Otherwise the suspension geometry will not function
properly.
