Compass 2WD L4-2.4L (2008)
5. Remove the engine roll mount (3) through bolt (2) and remove the fore/aft crossmember (4).
Installation
INSTALLATION
1. Install the fore/aft crossmember and install the engine anti-roll mount (3) through bolt (2).
2. Install the bolts (1, 2 and 3), and tighten using the following sequence:
a. Tighten the bolt (1) to 78 Nm (58 ft. lbs.).
b. Tighten the bolt (2) to 78 Nm (58 ft. lbs.).
c. Tighten the bolt (3) to 129 Nm (95 ft. lbs.).