Compass 2WD L4-2.4L (2008)
13. Remove the two bolts (1) securing the steering gear (2) to the crossmember.
14. Support the steering gear using a bungee cord or other to keep the steering gear from lowering when the crossmember is lowered.
15. Slowly lower the crossmember until there is enough space present to remove the stabilizer bar between the rear of the crossmember and the body.
Due to the fact that the fore-and-aft crossmember is still attached, do not lower crossmember any more than necessary to remove the stabilizer bar.
16. Remove the stabilizer bar out over rear of crossmember.
