Compass 2WD L4-2.4L (2008)
4. Secure the flex hose (2) routing bracket to the strut (6) with the mounting screw (1). Tighten the mounting screw to 13 Nm (120 in. lbs.).
5. Install the tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation.
Install and tighten the wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
6. Lower the vehicle.
7. Perform wheel alignment as necessary. If original strut is being reinstalled, wheel alignment is not necessary. See: Alignment/Service and Repair
