Compass 2WD L4-2.4L (2008)
Transmission Mode Indicator - CVT: Service and Repair
Removal
REMOVAL
NOTE: This procedure applies only to vehicles equipped with an optional automatic transmission.
1. Disconnect and isolate the battery negative cable.
2. Remove the gear selector bezel from the center floor console (1). See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Console Shifter Bezel - Removal.
3. Firmly grasp and pull the bulb (5) straight out of the socket (4) in the light box (3) on the left side of the gear selector mechanism (2).
